Administrator Guide

Figure 10. Citrix connection center

Customizing the display

By default, the Customize your display screen is available in both user mode and admin mode. Any changes to display

preferences are saved and available for the built-in user named thinuser. In a Dual-display configuration, if both displays are

connected, then by default, the displays are in the extended mode. The primary display is on the left (display 1), and the

secondary display is on the right (display 2). The resolutions of the displays are automatically detected by the system by

analyzing the display capabilities built in.

NOTE: Before changing the resolution of the screen, click the Display icon.

To customize the display, do the following:

1. Click the Display tab.

The Customize Your Display page is displayed.

Configuring thin client settings locally