Administrator Guide

Figure 8. Authentication screen
If the logon authentication fails, you are prompted with a screen. Click try again to query the server again.
NOTE:
You can break kiosk mode and enter into admin mode at any point of time by using the shortcut key. The
shortcut key is Ctrl + Alt + Shift + F11.
b. After the successful login, you can add the required applications or desktops from the left + button.
c. Click the application or desktop to start it. You are prompted with an error if there as an error message.
d. You can logout at any point of time by clicking the power icon on task bar. Depending on whether any application is
opened, you are prompted with an error message.
Figure 9. Log Off screen
e. If any applications are running, connection center window is displayed, select each application and either log off or
disconnect. Following which click the cross to close the control center and logoff completely.
NOTE:
If you do not follow above procedure to log off, you may see sessions active and running behind the displayed
log on button.
18 Configuring thin client settings locally