Administrator Guide

NOTE:

● The Up arrow is enabled when the particular NTP server can be moved to the top in the NTP Server list and it is

disabled when the particular NTP server is listed at the top of the NTP Server list.

● Click Down arrow to change the order of the particular NTP by moving it down in the list.

● The Down arrow is enabled when the particular NTP server can be moved down in the NTP Server list and it is

disabled when the particular NTP server is listed at the bottom of the NTP Server list.

4. Click Save to save the changes. Clicking Save button when, Set Time Automatically is in ON position, enables NTP

synchronization.

Configuring desktop appliance

We can configure Desktop Appliance (Power On to Power Off VDI theme) using GUI, INI and DHCP. For INI configuration, refer

the tags description of DesktopAppliance, CitrixConnectionType, PNAgentServer and Storename INI parameters.

For DHCP configuration,

● 181—Configure Citrix server url—either specify pnagent url xyz.com/citrix/pnagent/config.xml, storefront xyz.com/citrix/

store/discovery, or IP/FQDN.

● 203—Type of VDI theme

● 204—Type of Citrix server

● 205—Storename. For more information, see DHCP option tags

By default, the Desktop Appliance screen is available only in Admin mode. Any changes made through Desktop Appliance

screen is saved and continued for the built-in thinuser.

1. Click the ON/OFF button to enable or disable the VDI theme option after you log in to the session.

2. From the drop-down list, select your preferred VDI theme.

NOTE: Only Citrix theme is supported in this release.

Figure 6. Desktop appliance settings

Configuring thin client settings locally