Administrator Guide

Figure 81. Wyse Device Agent
1. In the WMS Server input box, enter the URL of Wyse Management Suite server.
2. In the Group Token input boxes, enter your group registration key to manage your ThinLinux device. This is a unique key for
registering your thin client device. Thin clients can be directly registered to Groups directly and must have a Group
Registration Key enabled to perform this action.
3. Click the ON/OFF button to enable or disable the Validate server certificate option. Enable this option to perform server
certificate validation for all device-to-server communication.
4. Do one of the following options:
● Click Register to register your thin client on the Wyse Management Suite server. When your thin client is successfully
registered, the status is shown as Registered with green color icon next to the Registration Status label. The caption
of the Register button changes to Unregister.
● Click Unregister, if you want to remove your thin client from the Wyse Management Suite. If Unregister fails, a dialog
box for the Force Unregister confirmation is displayed. Click Yes to forcefully unregister your device which is
managed by Wyse Management Suite. When you perform Register or Unregister or Force Unregister from the Agent
screen, the applet should not be closed until Registration Status. After successful registration, you can access the Wyse
Management Suite console where you can view and manage Device Asset Details, Real-Time commands, and the
Troubleshooting information of your registered thin client.
Directing the thin client to Wyse Management Suite server:
To direct your thin client to the Wyse Management Suite server, you must provide the Wyse Management Suite/MQTT
server details and the Group registration key. These details are discovered by Wyse Device Agent using any of the following
ways:
● Using DNS SRV record—You can register devices with the Wyse Management Suite server if DNS SRV record fields
are set with valid values. For more information about registering devices by using DNS SRV record, see the Wyse
Management Suite Administrator's Guide.
● Using DHCP scope options—You can obtain the Wyse Management Suite/MQTT server details and Group
Registration Key by querying the DHCP server with following option tags:
○ 199 – Scope option for Group Token (type = String, value = Wyse Management Suite-group-key).
○ 165 – Scope option for the Wyse Management Suite server.
○ 166 – Scope option for MQTT server—Optional.
○ 167 – Scope option for CA Validation—Optional.
108
Additional management configurations