Administrator Guide

2. From the drop-down list, select your preferred configuration source.
● Select the Local only source as configuration source. The INI configuration is stored locally on the device.
● Select the Server only source as configuration source, and do the following:
a. Click the ON/OFF button to enable or disable the specify server details manually option.
b. If enabled, enter the server URL, rootpath, and INI file download path for the secure server. If disabled, the server
details are automatically obtained from the DHCP server.
● Select the Server and Local option as the configuration source, and do the following:
a. Click the ON/OFF button to enable or disable the server and Local option. The INI configuration downloads from the
server during every restart of your thin client and if the server is not available, local configuration is used.
b. If enabled, enter the Server URL, username and password for the secure server.
3. Click Save to save the changes.
Logs and Tools
The Logs and Tools section provides the tools for troubleshooting and diagnostics purpose. By default, the Logs and Tools
screen is available only in admin mode.
1. Click the Logs tab to view and export system logs.
The Logs tab shows a list of system logs from where you can select a particular log file to view the contents and search text
within the content.
2. Check the check box shown on the left side of Log file name to select log files and click the Export button to export logs
into a USB drive or remote file server.
102
Additional management configurations