Administrator Guide

Table 21. Wyse Device Manager Server (continued)
Parameter Description
Auto Device Discovery is in OFF state. When this option is in
ON state, then the clients are discoverable using DNS SRV
record lookup.
DHCP option Tags Click the ON/OFF button to enable or disable this option.
This option will take effect if Enable Auto Device
Discovery is in OFF state. When this option is in ON state,
then the clients are discoverable using DHCP options Tags.
Manual Discovery From WDM Click the ON/OFF button to enable or disable this option.
If this option is enabled, the WDM server will be able to
discover the client through manual discovery.
Auto Discovery after missed checkins Enter the Auto Discovery after missed checkins.
The allowable number of missed check-in attempts before
going for auto discovery of Wyse Device Manager.
3. Click Save to save the changes.
INI management
On the Manage INI Configuration page, complete the following task:
Figure 75. Manage INI configuration
1. Click the ON/OFF button to enable or disable the Enable INI Configuration option. By enabling INI Configuration you can
manage this device by configuration files stored on the server or locally.
Additional management configurations
101