Release Notes
Port preferences on Wyse 5070 Extended thin client:
• Optional port can be used as second RJ45, SFP, or VGA.
• If wireless is enabled, the optional port cannot be used as second RJ45 or SFP.
• If front headphone is used, the back headset is disabled.
• When monitor is connected on USB-C port, DP2 becomes inactive.
• When VGA monitor is connected on VGA optional port, DP3 becomes inactive.
• Power option is available on the rst serial port.
• PCle slot is available.
Table 9. Ports
Ports DP1 DP2 DP3 VGA USB Type-C mDP4 mDP5 DP6
Monitor
priority
1 2B¹ 3B² 3A² 2A¹ 4 5 6
4K display Yes Yes Yes No³ Yes Yes Yes Yes
Non-4K
display
Yes Yes Yes Yes³ Yes Yes Yes Yes
¹DP2 and USB Type-C port are mutually exclusive with USB Type-C port taking higher priority.
²DP3 and VGA port are mutually exclusive with VGA port taking higher priority.
³VGA port supports only 1080p resolution.
Display matrix:
Table 10. Wyse 5070 Extended thin client with AMD GPU
Number of displays Supported display resolution
4K resolution
3840 x 2160 @ 60 Hz
Non-4K resolution
Up to 2560 x 1600 @ 60 Hz
One display Yes Yes
Two displays Yes Yes
Three displays¹ Yes Yes
Four displays Yes Yes
Five displays No² Yes
Six displays No² Yes
¹For three displays, Dell recommends that you congure rst two 4K displays on the main board (DP1~DP3), and the third 4K display on
AMD GPU card.
²Support only four monitors with 4K screen resolution @ 60 Hz and the remaining displays with 2K screen resolution.
Monitor priority—The following order denes the monitor priority set on ThinLinux 2.2 for Wyse 5070 Extended thin client:
• DP1 > DP2 > DP3 > mDP4 > mDP5 > DP6
• DP1 > USB-C > DP3 > mDP4 > mDP5 > DP6
• DP1 > DP2 > VGA > mDP4 > mDP5 > DP6
• DP1> USB-C > VGA > mDP4 > mDP5 > DP6
New and enhanced features
9