Release Notes

Issue ID Description Workaround
TL-1028 CAC is not found when you log in to the VMware Horizon session
using the onboard smart card reader.
There is no workaround.
TL-1119 After doing OEM branding, the services list is displayed during the
system boot.
There is no workaround.
TL-731 Wyse 5070 thin client does not automatically connect to a wireless
network once the client is connected to a hidden network.
Reconnect to the wireless network after restarting
the client.
TL-980 When you connect one 4K and two non-4K displays on the Wyse 5070
thin client, the values in few drop-down lists are not displayed. This
issue is observed on the Display settings and connections settings
pages.
There is no workaround.
TL-1088 GDM login screen remains blank when you perform imaging on a dual-
display setup.
Switch to one display.
TL-1065 When you switch to the admin mode from system settings and enter
the incorrect password, the incorrect password message is not
displayed. This is not observed on English and Korean builds.
Enter the appropriate password.
TL-722 AD PAM login takes more than 10 seconds. There is no workaround.
TL-562 The thin client login password expiry function is not supported. Reset the password on the server side.
TL-1044 The Citrix StoreFront connection does not launch the second time if
the rst attempt is a failure (when the target desktop is turned o). If
the desktop is turned on, you must restart the thin client.
There is no workaround.
TL-753 When you connect the display to DP2 and change the display rotation
to right, you cannot move the mouse cursor to the lower edge of the
screen.
Connect the display to DP1.
TL-887 Ericom show menu bar options are not displayed with the respective
system languages.
There is no workaround.
TL-1164 When the Ericom Power term connection is created using the INI
parameters, the COM2 port is not displayed in the Port section.
There is no workaround.
TL-896 When you enter a command in the Ericom console by using the
keyboard, the Ericom menu bar options are getting selected.
There is no workaround.
Known issues 13