Users Guide
Table Of Contents
- Dell Wyse 3040 Thin Client User Guide
- Welcome to Dell Wyse 3040 thin client
- Wyse 3040 thin client hardware installation
- Wyse 3040 thin client on ThinOS
- Logging on to the Wyse 3040 thin client running Wyse ThinOS
- Configuring the dual head display settings in Dell Wyse ThinOS
- Configuring the network settings on Dell Wyse ThinOS
- Configuring peripherals settings on Wyse ThinOS
- Power state
- Configuring the broker setup on Dell Wyse ThinOS
- Configuring the WDA settings on Dell Wyse ThinOS
- Wyse 3040 thin client on ThinLinux
- Accessing thin client BIOS settings on Wyse ThinLinux
- Logging on to the Wyse 3040 thin client running ThinLinux
- Configuring display on Dell Wyse ThinLinux
- Configuring the network settings on Dell WyseThinLinux
- Configuring peripherals settings on Wyse ThinLinux
- Power state
- Configuring connections locally on Dell Wyse ThinLinux
- Configuring WDA settings on Dell Wyse ThinLinux
- Major components of your system
- System specifications
- Thermal management on Wyse 3040 thin client
- BIOS overview
- Accessing thin client BIOS settings
- System Setup overview
- Boot Sequence
- Navigation keys
- General screen options
- System Configuration screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Maintenance screen options
- System Log screen options
- Updating the BIOS
- Troubleshooting your system
2. Select Broker type from the drop-down list.
a. If you select None from the list, click either of the following connection protocols:
b. If you select the Citrix Xen, use the following guidelines:
● Select the check box to enable the StoreFront style.
● Broker Server— Enter the IP address of the Broker Server.
● Select the check box to enable automatic reconnection at logon.
NOTE:
If you enable the automatic reconnection, you are able to select from the reconnection options. Click
either of the options where you can connect to the disconnected sessions only or connect to both active and
disconnected sessions.
● Select the check box to enable automatic reconnection from the button menu.
NOTE:
If you enable the automatic reconnection, you are able to select from the reconnection options. Click
either of the options where you can connect to the disconnected sessions only or connect to both active and
disconnected sessions.
● Account Self-service Server— Enter the IP address of the account self-service server.
● XenApp — Use this option, if you want to set default settings to XenApp.
● XenDesktop— Use this option, if you want to set default settings to XenDesktop.
c. If you select the VMware View, use the following guidelines:
● Broker Server— Enter the IP address of the Broker server.
● Security Mode
— Use this option to select the Security Mode. The available options are Warn on View default, Full security, and
No security.
d. If you select the Microsoft, enter the IP address of the broker server in the Broker Server box, and then click OK to
save the settings.
e. If you select Dell vWorkspace, use the following guidelines:
Wyse 3040 thin client on ThinOS
25