Administrator Guide

4 JSON cong— If you have already added a new team connection, you can enter a custom JSON conguration string in the
text box or import a conguration le.
b To congure the General tab, IPv4 Settings tab, and IPv6 Settings tab for team connection, see the conguration details for
Bond connection in this section.
5 Click Bridge to add and congure the bridge network connection for your thin client.
a Click the Bridge tab, and congure the following options:
1 Interface name — Type the name for your network interface.
2 Bridged connections — The number of bonded connections that are set up are listed here. To add a new bond connection,
click the Add button and select the type of connection you want to create. The available options are Ethernet, Wi-Fi, and
VLAN.
3 Aging time — Enter the Aging time duration in seconds.
4 Enable IGMP snooping—Select this check box to monitor Internet Group Management Protocol (IGMP) communications
among devices.
5 Enable STP — Select this check box to enable the Spanning Tree Protocol (STP) for your connection.
6 Priority — Enter the priority value.
7 Forward delay — Enter the forward delay duration in seconds.
8 Hello time — Enter the hello time duration in seconds.
9 Max age — Enter the value for the maximum age.
b To congure the General tab, IPv4 Settings tab, and IPv6 Settings tab for Bridge connection, see the conguration details for
Bond connection in this section.
6 Click VLAN to add and congure the VLAN network connection for your thin client.
a Click the VLAN tab, and congure the following options:
1 Parent interface — Type the name for your parent interface.
2 VLAN ID — Enter the value for the VLAN id.
3 VLAN interface name — Type the name for your VLAN interface.
4 Cloned MAC address — Type the cloned MAC address.
5 MTU —Species the size (in bytes) of the largest protocol data unit that the protocol layer can pass onwards.
6 Flags—Select the Reorder headers, Generic VLAN Registration Protocol (GVRP), Loose binding, and Multiple VLAN
Registration Protocol (MVRP) check boxes to enable the respective functions for your VLAN connection.
b To congure the General tab, IPv4 Settings tab, and IPv6 Settings tab for VLAN connection, see the conguration details for
Bond connection in this section.
7 Click Save to save your settings.
802.1x conguration
To congure the network connections:
44
Conguring thin client settings locally