Administrator Guide

Figure 29. Hidden Wi-Fi Network
5 Enter the name and security details of the hidden network that you want to connect to.
Table 2. Hidden network
Parameter Description
Connection From the drop-down list, select the type of connection.
Network name Enter the preferred network name.
Wi-Fi security From the drop-down list, select the security type.
6 On the Network page, click the History button to view the previous Wi-Fi connections and details.
Conguring wired network connection settings
To congure the wired connection settings, perform the following steps:
1 Click the Wired tab. The following attributes are displayed if the network cable is connected to your thin client and wired connection is
established.
• IPv4 Address
• IPv6 Address
• Hardware Address
• Default Route
• DNS
NOTE
: After the network is disconnected, only hardware address and last used information are displayed.
2 On the lower-right corner of the page, click the Settings icon to congure the Wired Network connections.
a In the Details tab, the following attributes are displayed.
• Link Speed
• IPv4 Address
• IPv6 Address
• Hardware Address
• Default Route
• DNS
3 Click the Security tab to congure the 802.1x security settings.
a Click the ON button to enable the 802.1x Security for your network connection.
b From the Authentication drop-down list, select the type of authentication you want to set for your network connection. The
available options are:
• TLS
Conguring
thin client settings locally 39