Administrator Guide
5 Select a printer driver, and click Forward. You can select the printer driver from database or search for a printer driver to download.
You can also browse to the location where you have saved the PostScript Printer Description (PPD) les, and select the appropriate
le.
6 Specify the Printer Name, Description, and Location.
7 Click Apply.
The printer is listed on the screen.
NOTE: You can click Print Test Page to test the printer.
8
Right-click the printer icon, and click Properties.
9 Congure the following tabs based on your printing preference:
• Settings—Use this tab to congure the location, device URL, model, and printer state.
• Policies—Use this tab to congure the printer state, error policy, operation policy, starting banner, and ending banner.
• Access Control—Use this tab to set the printing privileges to users.
• Printer Options—Use this tab to congure the general printer settings, such as media size.
• Job Options—Use this tab to specify the default job options for the printer.
• Ink/Toner Levels—Use this tab to view the marker levels and status messages of the printer.
10 Click OK.
The thin client is ready to print.
Conguring the sound settings
By default, the sound screen is available in both user mode and admin mode. Any changes to the sound settings are saved and available for
the built-in user named thinuser.
To congure the sound settings, do the following:
1 Move the Output volume slider to adjust the output or speaker volume. Click the ON/OFF button to enable or disable the output
volume.
2 Click the Output tab, and do the following:
28
Conguring thin client settings locally