Release Notes

Table 54. System Information (continued)
Component ThinOS 8.6 ThinOS 9.0
● Wyse Management Suite status is displayed.
Table 55. Network setup
Component ThinOS 8.6 ThinOS 9.0
Network Setup > General tab Radio buttons to select the type of
network interface.
Select the type of network interface
from a drop-down list.
Network Setup > Options tab Displays all the supported DHCP option
tags.
● DHCP option tags related to Citrix
and Wyse Management Suite are
displayed.
● DHCP option tags related to FTP and
Wyse Device Manager are removed.
● The User Class option for DHCP
Standard is changed to RFC 3004.
You must go to user class settings in
DHCP and add the user class length
in head.
Network Setup > WLAN tab Up and Down buttons for Wireless SSID
selection. The first SSID is connected,
and only eight SSIDs can be added.
● Use the Connect button to connect
the selected SSID.
● No limit on the maximum number of
wireless SSIDs.
Network Setup > ENET tab
● Check boxes to select IPv4 address,
IPv6 address, and IEEE802.1x
authentication.
● Option to configure advanced IPv6
settings.
● Move sliders to either left or right to
enable or disable the following
options:
○ IPv4
○ IPv6
○ IEEE802.1x authentication
● The Advanced button for IPv6 is
removed.
● The Wait DHCP option for IPv6 is
removed.
Wireless Profile Properties
● WPA and WPA2 are separate options
in the Security Type drop-down list.
● WEP is supported.
● Hide domain, Enable Single Sign-
On, and Domain are not supported in
EAP-GTC.
● WPA and WPA2 option are combined
in the Security Type drop-down list.
● WEP security type is removed.
● Enable Single Sign-On, and
Domain are supported in EAP-GTC.
Wireless Scan
● Use the Wireless Scan window to
scan the Wi-Fi networks available in
your area. However, you cannot sort
the scan results by SSID name, State
or Security Type.
● Use the Refresh button to refresh
the wireless network scan.
● You can sort the scan results by SSID
name, State or Security Type.
● The Refresh button is removed.
.
Table 56. Remote Connections
Component ThinOS 8.6 ThinOS 9.0
Remote Connections > General
Options
Enables you to clear any locally saved
Citrix connections.
The Clear locally saved connections
option is removed.
Remote Connections > Broker Setup
> Select Broker Type
Enables you to select any of the
following Broker agents from the list:
● Citrix Xen
● VMware View
Only the Citrix Broker agent is available
for selection.
58 ThinOS 9.0.1136