Reference Guide
Options Description
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
NOTE:
The VNC server password is not encrypted; not specifying it is
recommended. The user is prompted to enter the password when
the connection is made. This VNC server password directive never
starts a line, so it can be distinguished from the thin client user
sign-on password which starts a line.
Shared= {yes, no} Default is no
When a connection is shared, other viewers are not disconnected
when a new connection is established.
ViewOnly= {yes, no} Default is no.
VNC connection will be created in view only mode when this
parameter is set to Yes, which means mouse and keyboard input to
the remote machine will be disabled.
Ericom PowerTerm Connect Options
The following table contains the supported options you can use for Ericom PowerTerm Connect, where default values are in bold:
Example:
CONNECT=Ericom_Powerterm \
Description="Ericom_Test" \
Host=192.168.0.2 \
AutoConnect=Yes \
Reconnect=Yes \
ReconnectSeconds=30 \
Filename=RemoteCongurationFileName \
Filepath=wyse/WLX2/RemoteCongurationFilePath \
Terminal=WY50 \
TermName=Wyse 50 terminal \
Resolution=800x600 \
Fullscreen=No \
DeviceID=Wyse50 \
52
Connect Parameter Options