Reference Guide
Options Description
Reconnect option is used to automatically reconnect to an
application server after a disconnection.
ReconnectSeconds=<1 to 3600> Default is 30
Species the amount of time in seconds (default is 30) to wait
before automatic reconnection to an application server after a
disconnection. Requires Reconnect=yes or 1.
Resolution= {default, 640x480, 800x600, 1024x768, 1280x1024,
1600x1200}
Default value is default, which starts the connection using the
current desktop display setting.
Species the connection display resolution. The default value starts
the connection using the current desktop display setting.
SameLoginForRD={yes,no} Default is yes.
SameLoginForRD option is used to enable Smart Card
Authentication.
SocketRecvTimeout=<timeout in seconds> If the RDP client is unable to connect to the server in 120 seconds,
the connection times out. Using this parameter you can specify a
custom value other than 120 seconds.
Sound= {o, local, remote} Default is local.
You can enable or disable the sound eect using the Sound
parameter.
o - disable sound
local - enable sound to local machine (default)
remote - enable sound to remote machine
UseRDGateway={yes,no} Default is yes.
UseRDGateway option is used to enable RD gateway.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW, $TN} Default is none.
Species the name required to log in to the RDP server.
Either a conventional login name or a variable can be used. Variable
and Description:
username — Conventional log-in name
$SN — Serial number used
$MAC — MAC address used
$IP — IP Address used
$DN — Sign-on domain name
$UN — Sign-on name used
$PW — Sign-on password used
$TN — Terminal name
44 Connect Parameter Options