Reference Guide
Options Description
option is applicable only for Published Application and Storefront
connections.
SmartCard={ Yes,no} Default is no.
When set to yes, this option enables logging into the Citrix Server
with a Smart Card PIN. This parameter is not applicable for PA
connections.
SmartCardType={ GEMALTODOTNET, CAC, PIV} Species the type of the smart card you are using to make the
connection to the Storefront Server.
To enable smart card login, set parameter SmartCard=yes and
parameter smartcardtype to type of smart card.
NOTE: It is applicable only for storefront server.
StoreFront={yes, no} The option to have the connection attempt to connect to the
Storefront server. There is no default value. If set to no, the
connection attempts to connect to the PNAgent server.
StoreName=< Name of the Store> It species the name of the Store through which the connection for
Storefront server is established.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW, $TN} Species the name required to log in to the application server.
Either a conventional login name or a variable can be used.
Variable and Description:
username — Conventional login name
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
RDP Connect Options
The following table contains the supported options you can use for RDP connections where default values are in bold:
Example:
CONNECT=RDP \
Host=192.168.1.2 \
Description="RDP_Server" \
AutoConnect=yes \
Colors=16m \
40
Connect Parameter Options