Reference Guide

Parameter Description
Default value is no.
ICADynamicMapping={yes, no} For ICA only.
To enable or disable le system mapping for ICA session.
Default value is yes.
ICAFullscreen={yes, no} For ICA only.
Default is no.
Enables to run the session at full screen not in a window.
ICAhotkey={yes, no}[<hotkey name>=<supported value>] For ICA only.
Default is yes.
Yes/no option to enable and allow mapping of the hotkeys.
For example:
ICAhotkey=yes
Hotkey1Char=F1 Hotkey1Shift=Shift
Hotkey2Char=F3
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey11Char=plus Hotkey11Shift=Ctrl
NOTE: All hotkey options must be on one line.
ICAMMAudio={yes, no} For ICA only.
ICAMMAudio is used to enable Citrix HDX Multimedia audio. This
parameter requires two thin client reboots. If this parameter is set, then
audio will be played by using client encoding and decoding capabilities.
ICAMMVideo={yes, no} For ICA only.
Default is yes.
ICAMMVideo option is used to enable Citrix HDX Multimedia video.
This parameter requires two thin client reboots. If this parameter is
set ,then video is extracted by using the client rendering
capabilities(encoding and decoding).
ICAMultistream={True, False, yes, no}
To enable multiple streams to be used when connecting to a multistream
ICA enabled server, you must ensure this parameter is set to True or Yes.
Default is False or No
ICAProxyHost=< IP address> For ICA only.
Species the rewall server address for the ICA connection. When
conguring an alternate address for rewalls and HTTP, SOCKS is used for
ICAProxyType, you must provide the proxy server IP address and port.
24 Connection Settings Parameter Options