Reference Guide

Peripheral Settings Parameter Options
The following table contains parameters used for conguring peripheral settings such as keyboard, monitor, mouse, and printer.
Table 3. Peripheral Settings Parameter Options
Parameter Description
DisplaySettings=MON1<resolution=1920x1080>
MON2<resolution= 1024x768> MON3<resolution= 1024x768>
or
MON1 <resolution=1920x1080@60> MON2
<resolution=1024x768@60>
MON3 <resolution=1920x1080@60> MON2
<resolution=1024x768@60>
MON3 <resolution=1920x1080@60>
MON1<resolution=1024x768@60>
The string value is in the format of white space separated string
construct. The values keywords are case sensitive. The following are the
rules:
1 MON1/MON2: mandatory constant values for monitor1 and
monitor2, if specic resolutions or placement are to be set for each
individual monitors.
2 To specify resolutions: use 1920x1080 format, resolution numbers
with delimiter x (lowercase) after MON1/MON2 value keyword.
Resolutions are optional. If not specied, DDC (optimal) resolutions
are used.
For Example : DisplaySettings=MON1 1920x1080 MON2
1920x1200 MON3 1920x1200
3 To specify resolutions with refresh rate: use 1920x1080@60
format, refresh rate is optional. If not specied, the optimal refresh
rate is used automatically.
For Example: DisplaySettings=MON1 1920x1080@60 MON2
1920x1200@60 MON3 1920x1200@60
MON1 primary 1920x1080 MON2 1920x1200:
Used for the specied conguration of primary monitor that is retained
previously. Primary monitor is where the taskbar and app icons are
present. It species monitor as the primary monitor, use the value
keyword primary, which is optional.
For Example: Set MON1 as primary : DisplaySettings=MON1 primary
1920x1080 MON2 1920x1200 MON3 1920x1200
Set MON2 as primary : DisplaySettings=MON1 1920x1080 MON2
primary 1920x1200 MON3 1920x1200
Set MON3 as primary : DisplaySettings=MON1 1920x1080 MON2
1920x1200 MON3 primary 1920x1200
MON1 primary on-left 1920x1080, MON2 on-right 1920x1200
To specify monitors in horizontal placement and on the left or right, use
the legacy value keywords on-left and on-right after MON1/MON2 to
arrange monitors left/right placement. You can use these options in pair.
MON1 primary on-above 1920x1080, MON2 on-below 1920x1200
To specify monitors in vertical placement and on the top or bottom, use
the legacy value keywords on-above and on-below after each MON1
MON2 and MON3to arrange monitors top/bottom placement. You can
use these options in pair.
MON1 primary rotate-left 1920x1080 MON2 1920x1200 MON3
1920x1200
4
Peripheral Settings Parameter Options 17