Reference Guide
Parameter Description
halt or shutdown: Shuts down the devices.
reboot or restart: Reboots the devices.
ProgressUpdateInterval=<10–60> Default is 20
The interval specied for sending image upgrade status to WDM
server. Value less than 10 will be rounded to 10 and Value greater than
60 will be rounded to 60.
PasswordEncryptionCode={0, 1, 2} Default value is 1
Species the desired password encryption algorithm in INI. This
parameter must be place at least before the rst password used in
the wlx.ini le.
0: Plain Text
1: Base64 encoded
2: AES encoded
RootPath=<string> Default is /wyse
This path is used to access INI les on the server.
IMPORTANT: If root path is not provided, /wyse is the
default. The directory name /wlx2 is appended to the root
path entry before use, if /wlx2 folder is not available
then /wlx will be the fall back default.
SshIdleTimeout=<integer 1 to 60> Default is 0, which is disabled. Set the SSH connection idle timeout
in minutes. when the client idle timeout reaches, SSH connection will
be terminated automatically from SSH Server. This works only if SSH
is enabled.
ServerBusyCounter=<1 – 24> Default is 5.
The number of retries when server is busy. There is no hard limit
enforced as this was designed as adhoc measure till wdm server
provides the counter value during checkin.
ServerBusyTimeout=<byte 10 – 360> Default is 30
The interval before Hagent goes for retry. There is no hard limit
enforced as this was designed as adhoc measure till wdm server
provides the timeout value during checkin.
System.Language=<string>
System.Language={en_US, fr_FR, es_ES, de_DE, nl_NL, pt_PT,
zh_CN, ko_KR, ja_JP}
System.Language — The value species the UI language and the
locality where it will be used. For example, System.Language =
en_US.
System.Language – Default is en_US. It species only one language
in INI.
NOTE:
Do not specify any encoding.
TimeFormat=<String> Default is 12h
Species the system time format.
General Settings Parameter Options 15