Administrator Guide
• For RTME 2.1, right-click the RTME icon on taskbar and select Call Statistics.
The attributes, such as received packets, sent packets, video frame rate, video resolution, audio codec, and video codec are displayed in
the above described window.
Verifying the RTME 1.8 Status
The Citrix HDX RealTime Connector for Microsoft Lync 2013 dialog box enables you to verify the RTME 1.8 status.
To view the Citrix HDX RealTime Connector for Microsoft Lync 2013 dialog box:
1 Do any of the following to view the Citrix HDX RealTime Connector for Microsoft Lync 2013 dialog box:
• Click the RTME icon in the lower-left corner of the Lync application window, and click Audio Video Settings.
• Click the Lync menu icon in the upper-right corner of the Lync application window, and click Tools > Audio Video Settings.
The Citrix HDX RealTime Connector for Microsoft Lync 2013 dialog box is displayed.
2 Click the About tab in the Citrix HDX RealTime Connector for Microsoft Lync 2013 dialog box.
The RTMS status is displayed in the upper-right pane of the dialog box. If the RealTime Multimedia Engine is successfully initiated
between the ThinOS client and Citrix Desktop, the RTME status is displayed as follows:
Status
Registered
Connection Type Secured
Mode Optimized
You can also view the Citrix HDX RealTime Connector for Microsoft Lync 2013 version and Citrix HDX RealTime Media Engine
version in the dialog box.
3 Click the Audio Device tab to congure the RTME audio settings, such as speakers, microphone, and ringer settings.
NOTE
: The RTME audio device on ThinOS shows only one device from ThinOS local playback device. It can actually work
the way they are congured at ThinOS local playback device and record device. The RTME audio device for ringtone is
limited to use ThinOS local playback device. This is a known Issue.
98 Citrix HDX RealTime Multimedia Engine (RTME)