Administrator Guide
This name can be dierent for each vendor. This eld is required and must be correct so that the network printer accepts
incoming print jobs properly. For example, auto can be used for HP LaserJet 4200n PCL6 as per documentation found on the HP
Web site.
NOTE:
If the printer is attached to another thin client on your network, the LPD Queue Name must match the content of the
Printer Name box on the thin client with the printer attached.
f Printer Class — (Optional) Select the printer class from the list.
g Enable the printer device — Must be selected to enable the printer. It enables the device so it displays on the remote host.
3 Click OK to save the settings.
Conguring the SMBs settings
To congure the SMBs settings:
1 From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
2 Click SMBs tab, and use the following guidelines when printing to a Windows network printer.
a Select SMB —Select the SMB you want from the list.
b Printer Name —(Required) Enter the name to be displayed in your list of printers.
c Printer Identication- Enter the type or model of the printer in the exact text of the Windows printer driver name—including
capitalizations and spaces.
This name must be either the device driver name for the printer under the Microsoft Windows system, or a key to map to the
device driver. If not specied, the name will be defaulted to the printer-supplied identication for standard direct-connected USB
printers or Generic / Text for non-USB connected printers upon connection to Windows hosts. The driver name mapping takes
place either through a printer-mapping le read by the system as part of the global prole (wnos.ini) or by MetaFrame servers
through the MetaFrame printer conguration le (\winnt\system32\wtsprnt.inf).
Conguring
Thin Client Settings 87