Administrator Guide
a Click the Playback Devices tab to select the type of the audio from the drop-down menu.
• Use slider to control the volume settings for the playback devices.
• Select the check box to mute.
b Click the Recorded Devices tab to select the type of the record from the drop-down menu.
• Use slider to control the volume settings for the record devices.
• Select the check box to mute.
c The Recorder tab allows you to do the following tasks:
• Collect information about the speaker and microphone currently being used.
• Examine the performance of the speaker and microphone currently being used.
• Export the recorded audio sample to a USB key for archiving and further analysis.
For example, the connected USB headsets are displayed in the drop-down. Select the HD Audio option for analog earphone use,
the Speaker check box to enable the internal speaker, and the Boost check box for audio enhancement.
d Select the Speaker check box to connect the speaker.
e Select the Boost check box to boost the connected devices.
Conguring the Serial Settings
To congure the Serial settings:
1 From the desktop menu, click System Setup, and then click Peripherals.
The Peripherals dialog box is displayed.
2 Click the Serial tab and do the following:
Conguring
Thin Client Settings 79