Administrator Guide
Conguring the WDA Settings
Use this tab to congure the WDM and CCM settings.
To congure the WDA settings, do the following:
1 From the desktop menu, click System Setup, and then click Central Conguration.
The Central Conguration dialog box is displayed.
2 Click WDA, and use the following guidelines.
WDM is selected by default. WDA service automatically runs after the client boot up.
If the rst discovery, for example, the WDM service is not successful, then it seeks for the next priority, for example, CCM service.
This continues till a discovery is successful. If all discoveries fail, then it is started again automatically after a xed time (24 hours).
a WDM Servers — Enter the IP addresses or host names, if WDM is used. Locations can also be supplied through user proles, if
user INI proles are used.
b DNS Name Record — (Dynamic Discovery) Allows devices to use the DNS host name lookup method to discover a WDM
Server.
c DHCP Inform — (Dynamic Discovery) Allows devices to use DHCP Inform to discover a WDM Server.
Conguring
the Connectivity 61