Administrator Guide
• Auto Connect List—Enter the name of the desktops that you want to launch automatically after logging in to the respective
broker. More than one desktop can be listed. Each desktop name is separated by a semi-colon, and is case-sensitive.
• Select the check box to enable vWorkspace Gateway.
• vWorkspace Gateway— Enter the IP Address of the vWorkspace Gateway.
f If you select Other, you must enter the IP address of the Broker server in the Broker Server box.
g If you select the Amazon Workspaces, use the following guidelines:
NOTE: Amazon Workspaces connection is applicable only for PCoIP clients running ThinOS 8.3 and later versions.
• Broker Server— Enter the IP address/Hostname/FQDN of the Broker Server.
• Auto Connect List—Enter the name of the desktops that you want to launch automatically after logging in to the respective
broker. More than one desktop can be listed. Each desktop name is separated by a semi-colon, and is case-sensitive.
• Security mode—Select the preferred Security mode from the following options:
• Warning —Warn Security requires FQDN address for domain certicate installed in PCM. If certicate is not installed on
the client, corresponding warning message is displayed for you to continue.
• Full—Full Security requires FQDN address with domain certicate installed in PCM, and certicate installed on the client.
• Low—Security allows FQDN/IP address with/without certicate.
• Default— Follows global security mode settings.
• Connection Protocol— The drop-down list is disabled for AWS broker. By default, the option is set to PCoIP Only.
32
Conguring the Connectivity