Administrator Guide
Important Notes
• USB 3.0 on Wyse 7010 with ThinOS (Z10D)—The Wyse 7010 with ThinOS (Z10D) devices support two USB 3.0 ports. The USB 3.0 is
supported on ThinOS 8.1 and compatible with USB 2.0. When USB 2.0 device is connected to 3.0 ports, the behavior of the device
remains unaltered. For USB 3.0 device to connect to 3.0 ports, the device type should be of 5 Gbps. All types of USB devices work
when connected to USB 3.0 port.
Known issue
• Camera preview has some known issue.
• Create INI options to change the BIOS feature— New INI Parameters are added to change the BIOS feature on the ThinOS devices.
INI Parameters:
Device=cmos
[Password=password encrypt={no, yes}]
[BootOrder={PXE, HardDisk, USB}]
[WakeOnLan={yes, no}]
[AutoPower={yes, no}]
[BootFromUSB={yes, no}]
[USBController={yes, no}]
[COMController={yes, no}]
[PopupMenu={yes, no}]
[OnboardAudio={yes, no}]
Supported platforms:
• Wyse 3020 with ThinOS (T10D)
• Wyse 3030 LT with ThinOS
• Wyse 3040 with ThinOS
• Wyse 5010 with ThinOS (D10D)
• Wyse 5040 AIO thin client (5212)
• Wyse 5060 with ThinOS
• Wyse 7010 with ThinOS (Z10D)
This feature is supported on the following PCoIP enabled clients:
• Wyse 3030 LT with PCoIP
• Wyse 3040 with PCoIP
• Wyse 5010 with PCoIP (D10DP)
• Wyse 5040 with PCoIP (5213)
• Wyse 5060 with PCoIP
NOTE
: For platform Wyse 3020 with ThinOS (T10D), only support options (Password/Encrypt/BootOrder/AutoPower) are
available.
• Present the Hardware conguration in ThinOS from BIOS – This feature is displayed in the General tab of System Information. The
tab displays the hardware conguration information from the BIOS. Based on the BIOS, user can view the following six parameters
related to hardware conguration:
CPU Speed, Memory Speed, ROM Size, SSD Size, Parallel Ports, and Serial ports.
F
Important Notes 155