Reference Guide

EnableRTME— This option controls the launch of RTME service.
The default value is enabled.
FlipByTimer— This option selects the screen refresh method. For
some old server, there is no EndOfFrame transferred to the client.
Then we can use this option to x such issues.
RefreshTimeOut—RefreshTimeOut triggers auto-refresh which
updates ICA applications automatically. The value format dd:hh:mm,
indicate days&&hours&&minutes as the auto-refresh interval. The
default value is 0, that disables auto-refresh.
Timeout– This option controls the credential prompt after ICA
broker logon was timeout. Session ticket is invalid now. If yes, users
have to enter their credential to re-login to launch session, if no,
ThinOS will use the default credential to do login in background.
The default is yes.
NOTE: Other Citrix INI parameters are not listed here.
However, these Citrix INI parameters are supported on
ICA connection by using INI SessionConfig=ICA.
PasswordExpireNotify —This option enables the password expire
notication, which should congure in storefront server side,
Authentication, password change set as At any time. Then before
the password expires, logon prompts a message displaying the
number of days after which the password will expire and let you
change the password. The option WarnPopup=no can disable the
warning message when session reliability happens to decrease the
administrative support calls.
RefreshPopupNotice — This option enables or disables the popup
notice during refresh in progress. The default value is yes.
SessionCong=PCoIP
[USBRedirection={PCoIP, TCX}]
[ShowDisconnectMessage={yes, no}]
[ShowReconnectMessageTime=seconds]
[ResumeTimeout=seconds]
SessionCong — Species the PCoIP default settings of the
optional connection parameters for all PCoIP sessions.
USBRedirection — Default is PCoIP. Species the channel of USB
devices redirection.
ShowDisconnectMessage — Default is yes. Yes/no option to
display a disconnect message when a session is disconnected. If set
to yes, the message is displayed; if set to no, the message will only
show in the Event Log.
ShowReconnectMessaageTime— This option species the
number of seconds to show the session reconnect message box
after the session detects the network congest. The default value is
50 seconds.
ResumeTimeout—The option ResumeTimeout species the
number of seconds to wait after the reconnection dialog box
prompts, and before the session successfully reconnects. If timeout
value is reached then the session is closed. The default value is
1200 seconds.
**SessionCong=RDP
[MaxBmpCache={128 to 1024}]
[DefaultColor={0,1,2}]
[EnableNLA]={no, yes}]
[ForceSpan={no, yes}]
SessionCong — Species the RDP default settings of the
optional connection parameters for all RDP sessions.
MaxBmpCache — Species the maximum bitmap cache number.
This impacts the memory usage of an RDP session.
DefaultColor — Species auto (0), 16-bit (1), and 32-bit (2)
options.
Parameters for WNOS INI, {username} INI, and $MAC INI les 79