Reference Guide

Group 1: Description="Dev team" groupname=dev
The le \wnos\ini\dev\dev.ini must be created in the le server. In
the dev.ini, the broker, domain list, or connections can be dened
for the dev team.
Group 2: .Description="Sus team"
The le \wnos\ini\Sus team\Sus team.ini must be created in the
le server. In the Sus team.ini, the broker, broker list, or connections
can be dened for the Sus team.
Group3...4...n...and so on.
After a user selects a group, the system will load the group ini le
rst, and then load the \wnos\ini\{group_name}\username.ini. If
the username.ini in the group directory is not found, it will attempt
to load \wnos\ini\username.ini as before.
Because the group list may dene dierent brokers, the
SelectServerList statement will be invalid if set SelectGroup=yes.
Serial={COM1, COM2, COM3, COM4}
[Baud={1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200}]
[Parity={None, Even, Odd}]
[Stop={1, 1.5, 2}]
[Size={5, 6, 7, 8}]
[Flow={None, XON/XOFF, CTS/RTS, Both}]
[Touch={no, yes}]
[Touch_XYReverse={no, yes}]
[Touch_type={elo, microtouch, fastpoint}]
Serial — Default is COM1. Species the local serial ports
conguration.
Baud — Species the local serial port baud rate.
Parity — Species the local serial port parity.
Stop — Species the local serial port stop.
Size — Species the local serial port size.
Flow — Species the local serial port ow.
Touch — Default is no. Yes/no option to denote that a serial touch
screen is attached.
Touch_XYReverse — Default is no. Yes/no option to denote a
reversal of the X and Y coordinates which are needed for some
touch screens.
Touch_type — Default is elo. Species the type of touchscreen
being used.
NOTE: Options must be specied in the order shown.
9035366678
**SessionCong=ALL
[unmapprinters={no, yes}]
[unmapserials={no, yes}]
[smartcards={no, yes}]
[mapdisks={no, yes}]
[disablesound={no, yes}]
[unmapusb={no, yes}]
[DisksReadOnly={no, yes}]
[MouseQueueTimer={0–99}]
SessionCong — Species the default settings of the optional
connection parameters for all sessions.
unmapprinters — Default is no. Yes/no option to un-map printers.
unmapserials — Default is no. Yes/no option to un-map serials.
smartcards — Default is no. Yes/no option to use smartcards.
mapdisks — Default is no. Yes/no option to map disks.
disablesound — Default is no. Yes/no option to disable sound.
unmapusb — Default is no. Yes/no option to un-map USBs.
DisksReadOnly — Default is no. Yes/no option to mount mass
storage disks as read-only.
Parameters for WNOS INI, {username} INI, and $MAC INI les 75