Reference Guide

The default screen saver value is 10 minutes and the maximization
value is 30 minutes.
LockTerminal— This is an optional parameter and species to put
the thin client in LOCK state when the screen saver is activated.
Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is
activated. The user is prompted with an unlock dialog box to enter
the sign-on password to unlock the thin client. LockTerminal
settings are saved into NVRAM if LockTerminal=1 and
EnableLocal=yes is set in the wnos.ini le.
2— Puts the thin client in a LOCK state when the screen saver is
activated, however, the unlock dialog box cannot be viewed and
the desktop uses Blank the Screen as the screensaver.
3— Puts the thin client in a LOCK state when the screen saver is
activated, and the username and password are needed to unlock
the terminal. The Password eld in the Unlocking window is
invisible.
When you click OK or press the Return key, a message box pops up
to input the username and password to unlock the terminal.
NOTE:
The user must be signed on with a password for a Lock
action to take eect. If set in KeySequence, users can lock
the thin client at any time by pressing Ctrl+Alt+Left Arrow or
Ctrl+Alt+Right Arrow.
Type — Species which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
3 — Showing Pictures
Imagele — This is an optional parameter and species an image
le residing in the bitmap sub-folder under the home folder to be
used as a Moving Image screensaver.
If Type is set to 2 and no image le is present then the default Dell
Wyse logo is used.
If Type is set to 3, pictures residing in picture subfolder under the
home folder are displayed.
If SelectGroup=yes, then the pictures residing in the picture
subfolder under the group folder are displayed. For example,
/wnos/ini/{group_dir}/picture
If group pictures do not exist, global pictures are used. Supported
formats include JPG, GIF, PNG and BMP.
PictureTimer — Species the interval to wait in seconds to display
another picture. Default value is 6 seconds.
52
Parameters for WNOS INI, {username} INI, and $MAC INI les