Reference Guide

For example, the following settings are valid:
BootOrder=PXE;HardDisk;USB
BootOrder=HardDisk;PXE;USB
BootOrder=USB;PXE;HardDisk
However, the following settings are invalid:
BootOrder=PXE;HardDisk
BootOrder=PXE;PXE;USB
BootOrder=PXE;HardDisk;USB;PXE
If the rst boot order is not HardDisk, the system restart will boot
from the BIOS setting.
BootpDisable={no, yes}
Default is no.
BootpDisable — Yes/no option to disable BOOTP requests.
ThinOS supports both DHCP and BOOTP to obtain the network
congurations. In the rst two attempts, only DHCP is requested.
Then, both DHCP and BOOTP are requested.
For some environments, BOOTP requests will delay obtaining the IP
from the DHCP server. Set BootpDisable=yes will only perform a
DHCP request. This setting is only valid after the next reboot.
CmosPassword=<password>
[encrypt={no, yes}]
CmosPassword — Species the BIOS password on supported
platforms; string up to 8 characters.
encrypt — Default is yes. If encrypt=yes, an encrypted string is
used as a password and the password is encoded by Dell Wyse
encrypt tool.
CustomInfo={yes, no}
[Custom1=custom1_str]
[Custom2=custom2_str]
[Custom3=custom3_str]
[Location=location_str]
[Contact=contact_str]
Yes/no option to congure or store custom information. If
CustomInfo=yes, the custom information congured by the
following options will be stored into NVRAM. If CustomInfo=no, the
custom information in NVRAM will be cleared.
For example:
CustomInfo=yes custom1=11 custom2=2 custom3=3
location=wyse contact=peter
NOTE: Maximum length is 32 characters.
**DeskColor=”rrr ggg bbb”
Default is “16 100 36”; where DeskColor =“16 100 36” (green) is
the default.
Species the desktop background color in RGB string format that
must be enclosed in quotes, where rrr, ggg, and bbb are decimal
numbers in the rage of 0 to 255. When using this parameter in a
wnos.ini le, it will be saved to NVRAM if EnableLocal is set to yes
in the wnos.ini le.
NOTE:
The MirrorFileServer parameter also supports the DeskColor
parameter.
**Desktop=bitmap le
[Layout={center, tile, stretch}]
[IconTextColor="rrr ggg bbb"]
Desktop — Species a bitmap le to be used as wallpaper for the
local desktop. This le could be a 4-bit, 8-bit, or 24-bit BMP le or a
standard GIF le or a standard JPEG le. The le must be located in
the FTP server wnos\bitmap directory. Default is Wyse wallpaper.
To disable the parameter, leave value blank (Desktop=wysedefault).
42 Parameters for WNOS INI, {username} INI, and $MAC INI les