Reference Guide

a certain amount of time after user pause the mouse pointer away
from the toolbar.
ToolbarStay — ToolbarStay={1~20} controls the auto-hide
duration, 0.5s per value. Thus if ToolbarStay=1, the Toolbar will
auto-hide after 0.5 second; If ToolbarStay=10, the Toolbar will auto-
hide after 5 seconds.
EnableLogonMainMenu — Default is no. Yes/no option to enable
the main menu if you click the mouse button on the desktop prior
to logon in Zero mode.
SysName
IMPORTANT: DISCONTINUED. DO NOT USE.
TcpTimeOut={1 , 2}
Default is 1.
Species the timeout value of a TCP connection. The number of 30
seconds for the timeout value of a TCP connection. The value must
be 1 or 2 which means the connection timeout value is from 1x30=
30 seconds to 2x30= 60 seconds.
Values of 3-255 are recognized only for backwards compatibility
that is >2 = 60 seconds, however, these values should not be used
and the value should be set to 2.
TCXLicense
IMPORTANT: DISCONTINUED. DO NOT USE.
VncPassword=<password>
[encrypt={no, yes}]
VncPassword — Species a string of up to 8 characters as the
password used for shadowing.
encrypt — Default is no. Yes/no option to set according to
whether or not the vncpassword you are using is encrypted.
IMPORTANT: To use VNC Shadow, you must set
MaxVNCD=1 and dene a password; The MaxVNCD
default is 0 and this disables VNC. If you are using an
encrypted password, you must set encrypt to yes. For
example:
VncPassword=<encoded password> encrypt=yes
If you are using a plain text password, you must set
encrypt to no. For example:
VncPassword=<plain text> encrypt=no
See also MaxVNCD in Table 4: Connection Settings: wnos.ini
les only to enable VNC shadowing.
See also VNCPrompt in Table 7: Connection Settings:
wnos.ini les, {username} INI, and $MAC INI Files to enable a
VNC shadowing prompt to a user.
WarnUnlinkDisabled={yes, no}
Default is no.
Yes/no option to disable the pop-up warning message when a
network has no link for an ICA/ RDP session.
WDAService=yes
[Priority ={WDM, CCM, “WDM;CCM”, “CCM;WDM”}]
WDA Service always runs in the background.If priority is available,
WDA discovers the protocol according to it.
There are only two protocols available now - WDM, and CCM. For
example, if priority=WDM; CCM, WDA tries to discover WDM
Parameters for WNOS INI les only 37