Reference Guide

PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host =
192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description =
test2; host = HostName2.wyse.com; TimeOut=200;
descriprion = test3 host =
https://
server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type is
default.
VDI example:
ConnectionBroker=VDM
SelectServerList=VDI; Default=test5
description = test4; host = 192.168.0.11;
description = test5; host = host2.wyse.com
The Default option following "SelectServerList={PNA, VDI}" can
specify the default server. The value is one of server description
dened after that. After one selects another server and sign o,
this default server is selected. If default option is not specied, the
last selected server is selected in the next sign on.
Service={snmpd, thinprint, vncd, wdm,
vda <port number>} disable={no, yes}
Service — Species the services you can enable or disable; there
are dierent syntaxes for the dierent services.
disable — Default is no. Yes/no option to disable the services.
Disable must follow the Service parameter.
Service=snmpd disable={no, yes}
[community=<snmp_community> [encrypt={yes, no}]]
[communityReadOnly=<snmp_community_read_only>
[encrypt={yes, no}]]
[servers=server_list]
Default is no.
Service=snmpd disable — Yes/no option to disable the snmpd
service.
community — The option community is same as the statement
Community. encrypt option is same as that in the statement
community.
communityReadOnly— This option is to set community only has
snmp get and get_next privileges.
The following encrypt option is only for indicating, if value of
communityReadOnly is encrypted.
Servers option, if set, limits the valid snmp management site to the
IP addresses in the server_list parameter, which contains 1 to 4
IPv4 IP addresses currently. If not, all the set IP addresses seen as
valid.
Service=thinprint disable={no, yes}
[port=<port number>]
[PkSize={0-64000}]
Default is no.
Service=thinprint disable — Yes/no option to disable the thinprint
service.
port — Same as the statement ThinPrintEnable={no, yes}
port=portnumber.
PkSize — Species the default packet size that will be sent to the
server when negotiating with the thinprint server. The value 0 will
rely on the server default setting, 64000 in ThinPrint 7.6 and 32000
in previous ThinPrint versions.
32 Parameters for WNOS INI les only