Reference Guide

launched. The default value is no. EnableVDMCredSSP=yes works
only after you disable view security tunnel in server side.
DelCerticate={lename, all, builtin}
lename — Removes the named le from the nand ash or from
the memory.
all — Removes all certicates except built-in certicates included
by default.
builtin — Removes all certicates including the public certicates
included by default.
DesktopColorDepth={16, 32}
[RGB565={no, yes}]
DesktopColorDepth — Sets the desktop color to 16 or 32 bits. If
DesktopColorDepth=16, the default color is 15 bits.
RGB565 — Default isno. Applies only if the desktop color is using
16 bits.
IMPORTANT:
If the RBG565 parameter value is changed to yes, the thin
client will require a reboot.
DHCPExpire={reboot, shutdown}
Default is reboot.
When a DHCP lease expires, a message noties the user as follows:
DHCP Expired, you must reboot.
reboot — After 5 seconds, the system reboots.
shutdown — After 5 seconds, the system shuts down.
DHCPOptionsRemap={no, yes}
[DisableOption12={no, yes}]
[FileServer={128 to 254}]
[RootPath={128 to 254}]
[FtpUserName={128 to 254}]
[FtpPassWord={128 to 254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[WDMServer={128 to 254}]
[WDMPort={128 to 254}]
[PnliteServer={128 to 254}]
[DomainList={128 to 254}]
[VDIBroker-{248 to 254}]
[RapportSecurePort={128-254}]
[Discover={yes, no}]
[WDMSecurePort={128 to 254}]
[WDMFQDN={128-254}]
Default is
no.
DHCPOptionsRemap — Species whether or not the following
options can be set.
The value for each option must be from 128 to 254. Values for the
options must be dierent for each option. These options are used
to congure DHCP server tags for thin client booting.
The option DisableOption12 sets if the option tag 12 in DHCP is
accepted or not. As default, DHCP option 12 sets the hostname
and domain name of the terminal. For example, the information of
option 12 is terminal name.wyse.com, the terminal name will be set
as terminalname and the domain name will be set as wyse.com.
If you set dierent value for DisableOption12 from the value in
NVRAM, the system will automatically reboot to make the value
valid. (CIR36891)
RapportSecurePort— Species the HTTPS port of WDM server.
It is in 6.3 to support WDM4.7.
Discover—If Discover=yes, the device fetches Wyse DHCP
options from DHCP server, otherwise, it prevents the device from
fetching those information. Default value is yes. If the device
receives FileServer/WDMServer information through the DHCP
server, then the associate User interface is protected.
NOTE
:
WDMSecurePort is the specied HTTPS port of the WDM
server.
WDMSecurePort—Species the HTTPS port of WDM server.
Parameters for WNOS INI
les only 21