Reference Guide

[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not dened, the
client CMOS/BIOS internal clock will be used as a reference.
ManualOverride — Default is no. Yes/no option to override the
thin client System Preference Menu setting with this TimeZone
setting. TimeZone settings in the wnos.ini le will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini le.
Daylight — Default is no. Yes/no option to enable daylight saving
time; MMWWDD is a 6 digit number to specify the start and the
end of daylight saving time.
IMPORTANT: The Start and End options are in the
MMWWDD format, where:
MM = Month of the year. Values are 01 to 12 for the months
of the year from January to December. For example, 01 =
January, 12 = December
WW = Week of the Month. Values are 01 to 05 for the week
of the month, 05 is the last week. For example, 01 = 1st
week, 05 = the last week of the month.
DD = Day of the week. Values are 01 to 07 for the day in the
week from Monday to Sunday. For example, 01 = Monday, 07
= Sunday.
NOTE:
For the 2013 year, DST dates are Sunday, March 10, 2:00am
and ends Sunday, November 3, 2:00am.
TimeZoneName — Display name sent to the ICA/RDP
session such as Eastern Standard Time.
DayLightName — Display name for daylight saving time. If
daylight saving time is enabled, DayLightName should be
named something similar to Eastern Daylight Time, otherwise
it should be the same as TimeZoneName.
NOTE:
To congure daylight saving time for an RDP session, you
must enable the Allow Time Zone Redirection function. Use
the following guidelines:
1 Run gpedit.msc to open the Group Policy dialog box.
2 Click Computer Conguration in the Local Computer
Policy tree, and expand the Administrative Templates
folder.
3 Expand the Windows Components folder, and then
expand the Terminal Services folder.
4 Click Client/Server data redirection to open the
Setting list.
5 Right-click Allow Time Zone Redirection and select
Properties to open the Allow Time Zone Redirection
Properties dialog box.
6 Select the Enabled option, and then click OK.
7 Close the Group Policy dialog box.
Parameters for WNOS INI les only 17