Reference Guide

parameter, see MirrorFileServer parameter in Table 2: General
Settings for wnos.ini Files Only. Use EnableCacheIni on Wyse 3010
thin client with ThinOS platform (T10) only. This is because there is
no local ash on Wyse 3010 thin client with ThinOS (T10) platform,
and the MirrorFileServer parameter is not supported on it.
EnableGKey={yes, no}
Default is yes.
Yes/no option to enable G key reset. G key reset is supported for
Privilege=High in the NVRAM.
Exit={yes, no, all}
Default is yes.
Species the INI le processing.
yes — Processing returns to the prior INI le on the next line after
$include.
no — There is no operation.
all — All INI le processing is exited.
Include=<$mac.ini le or {username}.ini le> <$MAC.ini> Loads /wnos/inc/mac-address.ini.
NOTE:
The le name does not include the symbol : in the mac
address. See also the Exit parameter for information on how
to terminate Include. <{username}.ini> Loads /wnos/inc/
{username}-address.ini.
The le name does not include the symbol : in the
{username} address. See also the Exit parameter for
information on how to terminate Include.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server les functionality. This
enables the cache all server les such as INI les, wallpaper, bitmap,
font, local messages and so on to the local ash when les are
changed in the le server. ThinOS would use the cached les when
les on the le server are unavailable.
IMPORTANT: S10 is not supported
RootPath=<le server root path>
This le server root path is entered into thin client local setup (non-
volatile memory). The thin client immediately uses this path to
access les. The directory name \wnos will be appended to the le
server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-character
string. It can also be congured with system variables. Basically all
the variables can be used except $TN (recursive), $UN, $PW, $DN.
However, these are not yet available when parsing wnos.ini.
Additionally combinations like xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin client if
the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={no, yes}]
TimeZone — Species the time zone if the zone is unspecied on
the thin client or is used with ManualOverride. Supported zone
values s are listed in the System Preference dialog box on the thin
client and in TimeZone Parameter: Values.
16 Parameters for WNOS INI les only