Administrator Guide

○ Down
○ End
○ Enter
○ Esc
○ Home
○ Insert
○ Left Alt
○ Left
○ Left Ctrl
○ NumLock
○ Page Down
○ Page Up
○ Right Ctrl
○ Right
○ Right Alt
○ Space
○ Tab
○ Up
○ a~z
○ A~Z
○ 0~9
○ Modifier +, %, ^ (Shift, Alt, and Control)
● Suspend action—The server configuration controls this feature on ThinOS.
3. To configure the Self-Service Password Reset (SSPR) configuration object, select the appropriate options on the screen.
The SSPR configuration object controls the Self-Service Password Reset behavior for a user. The enabled attribute specifies
whether the user is allowed to reset their password as part of emergency access. The mandatory attribute specifies whether
the user must reset their password as part of emergency access.
4. To configure the RFIDeas configuration object, select the appropriate options on the screen.
The RFIDeas configuration object controls the behavior of the RFIDeas readers.
5. To configure the custom background configuration object, do the following:
a. On the Imprivata server, click Computer policy.
b. Click the Customization tab and upload a custom background file.
6. To configure the cobranding configuration object, do the following:
a. On the Imprivata server, click Computer policy.
b. Click the Customization tab and upload a logo image file.
The logo image impacts all the dialog boxes in ThinOS with raw logo.
7. To modify the text that is displayed in the sign-on UI and lock window, configure the SSPR customization configuration
object.
NOTE: ThinOS supports maximum of 17 characters.
8. To configure the password self-services force enrollment feature, select the check box. This enables you to reset the
primary authentication password.
Enroll a proximity card with Imprivata OneSign
About this task
This section describes how to enroll a proximity card with Imprivata OneSign.
Steps
1. Tap the proximity card. The card enrollment page is displayed.
2. Enter the credentials and click OK.
Proximity card is enrolled successfully.
58
Configuring connectivity