Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse 3040 Thin Client
11121314151617181920
2. From the Edit Policies drop-down menu, click ThinOS 9.x.
The Configuration Control | ThinOS window is displayed.
3. Click Advanced.
4. In the Firmware field, click Application Package Updates.
5. From the Select the ThinOS Package(s) to deploy drop-down menu, select the package.
NOTE: You can upload and deploy multiple firmware packages from the remote repository, tenant cloud repository or
operator cloud repository.
6. Click Save & Publish.
The thin client restarts and the application package is installed.
Upload and install ThinOS 9.x application packages
using Admin Policy Tool
Prerequisites
Ensure that you have installed the ThinOS v9.0 MR1 build.
Steps
1. Go to the Admin Policy Tool on the ThinOS client.
The Configuration Control | ThinOS window is displayed.
2. Click Advanced.
3. In the Firmware field, click Application Package Updates.
4. Browse and select the package.
5. From the Select the ThinOS Package(s) to deploy drop-down menu, select the uploaded package.
NOTE: You can select one or more ThinOS application packages simultaneously.
6. Click Save & Publish.
The thin client restarts and the application packages are installed.
Firmware installation using Dell Wyse USB Imaging
Tool
Use the Dell Wyse USB Imaging Tool version 3.3.0 to install the ThinOS 9.0 Merlin image on your thin client. For information
about installation instructions, see the Dell Wyse USB Imaging Tool version 3.3.0 User's Guide at downloads.dell.com/wyse/
USBFT/3.1.0/
Upgrade BIOS
Prerequisites
● Ensure that you have downloaded the BIOS file from Dell.com/support to your device.
● Ensure that you have registered the thin client to Wyse Management Suite, if you are upgrading BIOS using Wyse
Management Suite.
Steps
1. Open the Admin Policy Tool on the thin client or go to the ThinOS 9.x policy settings on Wyse Management Suite.
2. On the Configuration Control | ThinOS window, click the Advanced tab.
3. Expand Firmware and click BIOS Firmware Updates.
4. Click Browse and select the BIOS file to upload.
5. From the Select the ThinOS BIOS to deploy drop-down list, select the BIOS file that you have uploaded.
Upgrading the ThinOS firmware
19