Administrator Guide

Figure 20. VPN Manager
a. Enter the name of the session in the Name field. This option is mandatory. The maximum character limit is 21 characters.
b. Enter the IP address of the VPN server in the Server field. This option is mandatory and is defined as either an IP
address or a hostname. The maximum character limit is 63 characters.
c. Enter the login username in the Username field. This option is mandatory. The maximum character limit is 31 characters.
d. Enter the password in the Password field. This option is not mandatory. The maximum character limit is 31 characters.
e. Click the Auto-connection on system startup button to automatically connect to the VPN when the device restarts.
f. Click the Show progress in detail button to display the VPN connection progress.
g. Click the Show debug information button to display the VPN debug details for better troubleshooting.
h. Click OK.
When connections are created, the Auto column displays which connection is automatically connected when the device
restarts. Only one session can be set to autoconnect.
3. Select a session and click Connect.
4. Click OK to save your changes.
Configure VNC services
Steps
1. On the ThinOS client, open Admin Policy Tool or go to the ThinOS 9.x policy settings on Wyse Management Suite.
2. Click the Advanced tab.
3. Expand Services and click VNC Service.
4. To enable VNC shadowing, click the Enable VNC Daemon button.
a. Enter the password in the Password field. The password length is restricted to eight characters from ThinOS 9.1.2101.
b. Click the Enable 8 bits button to use 8-bit color resolution.
c. Click the Enable Zlib button to enable Zlib compression.
d. Click the Enable VNC Prompt button to display a prompt to allow or reject a VNC shadowing request.
62
Configuring connectivity