Administrator Guide

Shutdown option. If the option is disabled, when all sessions are ended, users cannot click the Cancel button on the
reboot or shutdown countdown window to stop the process.
b. Enter the default username in the Default Sign-on Username field.
c. Enter the default password in the Default Sign-on password field.
d. Enter the default domain in the Default Sign-on Domain field.
3. Click OK to save your settings.
Configuring the central configurations
Use the Central Configuration dialog box to configure the Wyse Management Suite server settings.
Configure the Wyse Management Suite settings
About this task
This section describes how to configure the Wyse Management Suite settings on your thin client.
Steps
1. From the desktop menu, click System Setup > Central Configuration.
The Central Configuration dialog box is displayed.
2. On the WMS tab, do the following:
Figure 19. Wyse Management Suite
a. Select the Enable Wyse Management Suite (WMS) check box to enable the Wyse Management Suite to discover
your thin client. By default, this option is selected. Wyse Management Suite service automatically runs after the client
boots.
NOTE:
If the first discovery, for example, the Wyse Management Suite service is not successful, it continues until a
discovery is successful. If all discoveries fail, it is started again automatically.
60 Configuring connectivity