Administrator Guide

The Remote Connections dialog box is displayed.
2. On the Broker Setup tab, select a VDI broker from the Broker type drop-down list, and configure the broker settings.
3. Click OK to save your settings.
NOTE: ThinOS enables you to log in to a VDI broker using only a smartcard certificate. To enable this feature, go
to Advanced > Login Experience > Login Settings from the Wyse Management Suite policy settings or the Admin
Policy Tool, and enable the Login Use Smartcard Certificate Only option under Login Experience. When the option
is enabled, other certificates such as user certificates are ignored.
Configure the General Options
About this task
This section describes how to configure the general options on your thin client.
Steps
1. From the desktop menu, click System Setup > Remote Connections.
The Remote Connections dialog box is displayed.
2. Click the General Options tab, and do the following:
Figure 18. General options
a. Click one of the following options to set the action that the thin client should perform after you exit all sessions:
● None—By default, None is selected and the thin client automatically returns to the terminal desktop.
● Sign-off automatically
● Shutdown the system automatically—If you select this option, you must specify a time period after which the thin
client shuts down.
● Restart the system automatically—If you select this option, you must specify a time period after which the thin
client restarts.
NOTE:
You can enable or disable the privilege to cancel shutdown or restart. From the Wyse Management Suite
policy settings or Admin Policy Tool, go to Advanced > Privacy & Security > Account Privileges > Previlige
Level, and select Customize from the drop-down list. Enabled or disable the Allow to Stop Forced Reboot/
Configuring connectivity 59