Administrator Guide

Editing a registration rule
About this task
Configure the rules for unmanaged devices by using the Registration option. To edit a registration rule, do the following:
Steps
1. Go to the Rules page.
2. Click Registration and select the unmanaged devices option.
3. Click Edit Rule.
The Edit Rule window is displayed.
You can view the following details:
● Rule
● Description
● Device Target
● Group
4. From the drop-down menu, select a target client to apply the Notification Target option and the time duration to apply the
Notification Frequency option.
NOTE: The notification frequency can be configured for every 4 hours, every 12 hours, daily, or weekly basis to the
target device.
5. Enter the number of days until you want to apply the rule in the Apply rule after (1–30 days) box.
NOTE: By default, registration of an unmanaged devices are unregistered after 30 days.
6. Click Save.
Create unmanaged device auto assignment rules
About this task
To create rules for the unmanaged device auto assignment, do the following:
Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Click the Add Rules tab.
4. Enter the Name, and select the Destination group.
5. Click the Add Condition option, and select the conditions for assigned rules.
6. Click Save.
The rule is displayed in the unmanaged group list. This rule is applied automatically, and the device is listed in the destination
group.
NOTE:
● If a select group is set as the Destination Group, the condition Assign device to the destination group is not
available.
● If a select group is set as the Destination Group, the condition Create a group under the destination group for
each unique value is not available.
Edit an unmanaged device auto assignment rule
Steps
1. Click the Rules tab.
Using Wyse Management Suite
191