Administrator Guide

To view the Device Details page of a particular device, click the device entry that is listed on the page. All the configuration
parameters of the device and the group level at which each parameter is applied are displayed on the Device Details page.
You can set the configuration parameter that is specific to the device.
NOTE: Parameters that are configured in this section override any parameters that were configured at the groups and/or
at the global level.
Search a device using filters on the Devices page
About this task
To search a device using filters on the Devices page , do the following:
Steps
1. Go to the Devices page.
2. From the Configuration Groups drop-down list, select either the default policy group or the groups which are added by an
administrator.
3. From the Status drop-down list, select any one of the following options:
● Registration
○ Registered
○
Pre-registered
○ Not Registered
○ Compliant
○ Pending
○ Non-Compliant
● Online Status
○ Online
○ Offline
○ Unknown
● Others
○ Recently Added
4. From the OS Type drop-down list, select ThinOS.
5. From the OS Subtype drop-down list, select a subtype for your operating system.
6. From the Platform drop-down list, select a platform.
7. From the OS Version drop-down list, select an OS version.
8. From the Agent Version drop-down list, select an agent version.
9. From the Subnet/Prefix drop-down list, select a subnet.
10. From the Timezone drop-down list, select the time zone.
11. From the Device Tag drop-down list, select the device tag.
12. Click Save to save the current filter.
The Save Current Filter dialog box is displayed.
13. Enter the name and description for the filter.
14. Select the check box to set the current filter as the default option.
15. Click Save Filter.
View the display parameters
From Wyse Management Suite 3.1, you can view the display setup of the devices running a Windows Embedded and ThinLinux
operating system. You can view the vendor name, model number, serial number, resolution, aspect ratio, mode, alignment, and
rotation details of the display setup.
Steps
1. Go to the Devices page.
188
Using Wyse Management Suite