Administrator Guide

● Select Timeout Type—Select the action to be performed after the VNC shadowing request times out. You can
select Accept or Reject.
● Timeout—Specify a time between 0 to 600 seconds for the VNC shadowing request to timeout, if there is no user
interaction.
d. Click the Enable View Only button to activate the view only mode.
e. Click the Active Visible button to notify the user that the device is being shadowed.
f. Enter the IP addresses from which VNC connections can be initiated, in the VNCD Server field.
g. Specify the VNC port used for TCP-based connections in the VNCD TCP Port field.
The default port is 5900. The current connection is not affected when you change the port. The port change takes
effect during the next VNC connection.
5. Click Save & Publish.
Configuring connectivity 59