Administrator Guide

Steps
1. From the desktop menu, click System Setup > Remote Connections.
The Remote Connections dialog box is displayed.
2. On the Broker Setup tab, select a VDI broker from the Broker type drop-down list, and configure the broker settings.
3. Click OK to save your settings.
Configure the General Options
About this task
This section describes how to configure the general options on your thin client.
Steps
1. From the desktop menu, click System Setup > Remote Connections.
The Remote Connections dialog box is displayed.
2. Click the General Options tab, and do the following:
Figure 18. General options
a. Click one of the following options to set the action that the thin client should perform after you exit all sessions:
● None
● Sign-off automatically
● Shutdown the system automatically—If you select this option, you must specify a time period after which the thin
client shuts down.
● Restart the system automatically—If you select this option, you must specify a time period after which the thin
client restarts.
NOTE: By default, None is selected and the thin client automatically returns to the terminal desktop.
b. Enter the default username in the Default Sign-on Username field.
c. Enter the default password in the Default Sign-on password field.
d. Enter the default domain in the Default Sign-on Domain field.
3. Click OK to save your settings.
Configuring connectivity
55