Administrator Guide

Locking the thin client
ThinOS enables you to lock your thin client so that credentials are required to unlock and use the thin client again.
Shut down and restart
About this task
This section describes how to use the Shutdown dialog box to either shut down the system or restart the system.
Steps
1. From the desktop menu, click Shutdown.
The shutdown dialog box is displayed.
2. Click any of the following options:
● Shutdown the system—Enables you to shut down the system.
● Restart the system—Enables you to restart the operating system.
3. Click OK to save settings.
Battery information
This section is applicable to the Wyse 5470 Thin Client. The battery indicator is displayed on the system tray.
The following table contains the battery indicators:
Table 13. Battery indicators
Battery status Icon
While charging with the AC adapter
Battery 90% - 100% without connecting the AC adapter
Battery 50% - 89% without connecting the AC adapter
Battery 25% - 49% without connecting the AC adapter
Battery 9% - 24% without connecting the AC adapter
Battery 0% - 8% without connecting the AC adapter
● When the battery is lower than 12%, a notification is displayed at the right-bottom with the remaining percentage.
● Plugging in the AC adapter to charge the device increases brightness by 10% and disconnecting the AC adapter decreases
brightness by 10%.
● By default, the critical battery level is 5%. When the battery reaches the critical level, ThinOS is turned off automatically.
You must plug in the AC power to power on the thin client.
Login dialog box features
The Login dialog box enables you to do the following tasks:
● Log in broker to the configured server connection.
● Change or reset your own password, and unlock your account.
● Open the Shutdown dialog box by using Ctrl+Alt+Delete.
Getting started with ThinOS 9.1
39