Administrator Guide

3. Click OK to save your settings.
Configure the touchpad settings
About this task
This section describes how to configure the touchpad settings on the Wyse 5470 Thin Client.
Steps
1. From the desktop menu, click System Setup > Peripherals.
The Peripherals dialog box is displayed.
2. Click the Touchpad tab, and do the following:
a. To increase or decrease the mouse speed, move the Touchpad Speed slider either to the right or left.
b. Select the Swap left and right touchpad buttons check box if you want to swap the touchpad buttons for left-handed
operations.
c. Select the Reverse touchpad wheel scroll direction check box if you want to invert the direction of the touchpad
scroll wheel.
d. Select the Disable touchpad check box if you want to disable the touchpad on the device.
e. Click the Enable Timeout toggle switch if you to disable the touchpad while typing using the integrated keyboard.
3. Click OK to save your settings.
Touchpad gestures
This section is applicable to the Wyse 5470 Thin Client.
The touchpad on the Wyse 5470 Thin Client contains two buttons for the right and left mouse-clicks. The following table lists
the supported touchpad gestures on the Wyse 5470 Thin Client:
Table 45. Touchpad gestures
Touchpad
gesture
Additional information
Moving the mouse
cursor
Moving with one finger, the entire touchpad including the area with the buttons can be used for the
mouse cursor movement.
NOTE: The sensitivity of the cursor movement on the area with the buttons is slower compared to
the other areas. This design is for the stability of the buttons.
Left-click
● Tapping with one finger anywhere on the touchpad works as the mouse left-click.
● Pressing the left button on the touchpad works as the mouse left-click.
Right-click
● Tapping with two fingers anywhere on the touchpad works as the mouse right-click.
● Pressing the right button on the touchpad as the mouse right-click.
Double-click
● Tapping two times with one finger anywhere on the touchpad works as the mouse double-click.
● Pressing the left button twice on the touchpad works as mouse double-click.
Moving windows
● Press and hold the left button, and move the window by dragging a second finger on the touchpad.
● Dragging a window by tapping twice on the touchpad with one finger.
Zoom Placing two fingers on the touchpad and pinching or stretching out—Not supported.
Scroll Tapping two fingers and moving up or down.
Configure the audio settings
About this task
This section describes how to configure the audio settings on your thin client:
Configuring the thin client local settings
151