Administrator Guide

The SSPR configuration object controls the Self-Service Password Reset behavior for a user. The enabled attribute specifies
whether the user is allowed to reset their password as part of emergency access. The mandatory attribute specifies whether
the user must reset their password as part of emergency access.
4. To configure the RFIDeas configuration object, select the appropriate options on the screen.
The RFIDeas configuration object controls the behavior of the RFIDeas readers.
5. To configure the custom background configuration object, do the following:
a. On the Imprivata server, click Computer policy.
b. Click the Customization tab and upload a custom background file.
6. To configure the cobranding configuration object, do the following:
a. On the Imprivata server, click Computer policy.
b. Click the Customization tab and upload a logo image file.
The logo image impacts all the dialog boxes in ThinOS with raw logo.
7. To modify the text that is displayed in the sign-on UI and lock window, configure the SSPR customization configuration
object.
8. To configure the password self-services force enrollment feature, select the check box. This enables you to reset the
primary authentication password.
Use smart card as proximity card
You can use a smart card as a proximity card to authenticate the user. When you tap the smart card on the smart card reader,
the Imprivata agent uses the smart card's unique serial number as the Unique ID (UID) of the proximity card.
About this task
This section describes how to use a smart card as a proximity card.
Steps
1. Log in to the OneSign Administrator console.
2. Go to the Computers page and click Computer Policy.
3. In the Smart card readers section, select the Treat smart card authentications as proximity card authentications
check box.
Next steps
To authenticate the user using a proximity card, connect a supported reader to the thin client. Before you tap the card, ensure
that your card is already enrolled to the user. When you tap your card on the reader, the thin client authenticates the user and
starts the VDI connection.
Enroll a proximity card with Imprivata OneSign
About this task
This section describes how to enroll a proximity card with Imprivata OneSign.
Steps
1. Tap the proximity card. The card enrollment page is displayed.
2. Enter the credentials and click OK.
Proximity card is enrolled successfully.
Imprivata Bio-metric Single Sign-On
Fingerprint identification feature is highly reliable, and cannot be replicated, altered, or misappropriated.
The prerequisites of OneSign server are:
Configuring third-party authentication settings
133