Users Guide

Performance screen options
Option Description
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
• Enable Intel SpeedStep
Default setting: The option is enabled.
C-States Control Allows you to enable or disable the additional processor sleep states.
• C states
Default setting: The option is enabled.
Limit CPUID Value Allows you to enable CPUID Limit. Select the Enable CPUID Value check box to enable this feature. The field
limits the maximum value that the process Standard CPUID function supports. Some operating systems do not
complete installation when the maximum supported CPUID function is greater than 3.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
• Enable Intel TurboBoost
Default setting: The option is enabled.
Power Management screen options
Option
Description
AC Recovery Allows you to control the system’s behavior when AC power is restored after a AC power loss.
• Power Off
• Power On
• Last Power State
Default setting: Power Off
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
• Disabled
• Every Day
• Weekdays
• Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
• Enable USB Wake Support
Default setting: The option is disabled.
Wake on LAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
• Disabled
• LAN Only
• LAN with PXE Boot
Default setting: Disabled
BIOS overview 55