Users Guide

Option Description
• UEFI: Hard drive details
• IP4 Realtek PCIe GBE Family Controller
• IP6 Realtek PCIe GBE Family Controller
Boot List Options Allows you to change the boot list option:
• Add Boot Option
• Delete Boot option
• View
Date/Time Allows you to change the date and time.
System Configuration screen options
Option
Description
UEFI Network
Stack
Allows you to enable the UEFI Network Stack. By default, this function is not enabled. Select the Enable UEFI
Network Stack check box to enable this function. If enabled, UEFI Networking protocols are installed/available,
allowing pre-OS and early OS networking features to use any enabled NICs and/or SFP. This may be used without
PXE turned on.
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
• Enable USB Boot Support: This option is enabled by default.
• Enable Front USB Ports: This option is enabled by default.
• Enable Rear-Left Dual USB 2.0 Ports
Audio This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password.
Deleting the admin password automatically deletes the system password and the hard drive
password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
BIOS overview 53