Users Guide

1. Click the Output tab to configure the audio output settings.
Figure 13. Sound Settings
a) Move the Output volume slider to adjust the output or speaker volume. Click the Output volume button to enable or disable the
output volume.
b) Select the device for sound output from the listed output devices. The default audio output is the Analog Output.
c) Based on the channels available for the selected output device and profile, you can adjust the Balance and Fade values by moving
Balance and Fade sliders respectively.
d) Select the audio profile from the drop-down list.
e) Click the Test Speakers option. A dialog box is displayed. You can perform the speaker testing by playing sample wave files.
2. Click the Input tab to configure the audio input settings.
Figure 14. Sound Settings
40
Wyse 3040 thin client on ThinLinux