Users Guide

You can optimize performance and modify the frame rate per second, if the Optimize for CPU check box is selected—

supported values include 1/1, 1/2, 1/3, 1/4, 1/5, and 1/6– directly from the thin client (if the webcam supports Universal

Video Driver).

This feature is experimental and does not currently support central configuration (INI parameters). Also, this feature is

CPU intensive and is recommended for high performance products such as the Wyse 5010 thin client with ThinOS

(D10D), Wyse 3030 LT thin client with ThinOS and Wyse 3030 LT thin client with PCoIP.

Configuring the printer settings

Use the Printer Setup dialog box to configure network printers and local printers that are connected to the thin client. Through its USB

ports, a thin client can support multiple printers. If more than one printer is to be used and another port is not available on your thin client

and the port that is to be used must be shared with a USB modem converter, connect a USB hub to the port.

Configuring the ports settings

To configure the ports settings:

1. From the desktop menu, click System Setup, and then click Printer.

The Printer Setup dialog box is displayed.

2. Click the Ports tab, and use the following guidelines:

a) Select Port— Select the port you want from the list. LPT1 or LPT2 selects the connection to a direct-connected USB printer.

b) Printer Name — (Required) Enter name you want displayed in your list of printers.

most USB direct-connected printers report/fill in their printer name automatically.

NOTE:

If Enable LPD service for the printer is selected, the printer name becomes the queue name for other

clients using LPR to print to this printer.

c) Printer Identification — Enter the type or model of the printer in the exact text of the Windows printer driver name—including

capitalizations and spaces, most USB direct-connected printers report/fill in their printer identifications automatically.

This entry must be either the device driver name for the printer under the Microsoft Windows system, or a key to map to the

device driver. If not specified, the name will be defaulted to the printer-supplied identification for standard direct-connected USB

printers or Generic / Text Only for non-USB connected printers upon connection to Windows hosts. The driver name mapping

Wyse 3040 thin client on ThinOS